Thermocouple Wire
Sanvi Heat K Thermocouple Wire – Overview & Applications
Sanvi Heat K-type thermocouple wire operates based on the Seebeck effect, which generates a variable millivolt (mV) signal when the junction of two dissimilar metals—Nickel-Chromium (NiCr) and Nickel-Aluminium (NiAl)—is heated. This voltage difference is directly proportional to the temperature and can be accurately interpreted by temperature control and recording instruments. As a result, it enables precise monitoring and regulation of the temperature of workpieces during heat treatment processes. Connect | Contact
Applications:
K-type thermocouple wires are widely used in industrial heat treatment applications due to their broad temperature range, stability, and durability.
Here’s a revised and more polished version of your Safety section for clarity, professionalism, and consistency:
Safety Information
- No personal protective equipment (PPE) is required under normal operating conditions.
- The product poses no health risk when used as intended.
- In the event of smoke inhalation during combustion, move the affected person to fresh air and seek medical attention.
- If ingested, seek immediate medical attention.
- Follow good industrial hygiene practices at all times.
- In case of skin irritation, flush the affected area with cold water.
- If glass dust is generated due to rough handling:
- Wash it off the skin immediately.
- If it comes into contact with the eyes, flush thoroughly with clean water and seek medical attention.